You’ll need:
(Headboard)
30 foam boards 
8 yards of fabric 
Hot glue 
Hot glue gun 
Marker 
Ruler 
Tape
Box cutter
Drill
Screws 

(Sconces)
Crystal garland 

https://www.amazon.com/gp/aw/d/B07S2HHJ5L?psc=1&ref=ppx_pop_mob_b_asin_title

Mirror reflective paper 

https://www.amazon.com/gp/aw/d/B07S2HHJ5L?psc=1&ref=ppx_pop_mob_b_asin_title

Welcome back to my channel Glitter Babes.

My client today wanted a Paris themed room so I tried my best to stay within her design and I'm going

If you watched my other DIY Goddess Headboard, this is a similar template of how I did that.

I'm going to be taping these poster boards together and I believe I used a total of

I'm taping the poster boards together in rows of threes, and I'm going to make 4 rows of 3.

see, I am taping the front and the back of each board, and I'm doing that to make the board more sturdy.

So make sure that you are taping the front and back.

Now that I have my 4 rows of 3 I will be taping all 4 rows together using my tape and I'm taping again front and the back of the board.

And excuse the red board, they ran out of white for some reason and I had to do what I

So that's the reason why there are 3 red foam boards.

So the design of this headboard will be abstract so there's no right way to do this.

All I'm doing is creating shapes, mostly triangular shapes,

and I'm just going around the board drawing them out.

But as you can see if I draw a line a certain way I make sure it's parallel to another line and that is because where those lines are the tape will be and This is actually really easy to do because I didn't have to think about the design.

And I know I'm doing mine a specific way, but if it's easier for you to draw the whole triangle or the whole shape and then draw another line or the shape on top of it, if that's easier then you can do it

Everything fit perfectly, so I have no complaints.

And As you can see, I have the double lines, but if you

do not care to have the silver in between each shape, you can just do 1 line and put everything back together without the silver in between.

Next, I will be taking my box cutter and cutting out the shapes.

I will only be using the actual shape and the extra pieces I will be throwing away.

So this right here is an extra piece and I will be throwing that away.

Because like I said earlier, that is where the silver will be showing through the silver adhesive tape.

And it's not tape, it's silver adhesive reflective paper but

And don't be discouraged, this project is super easy, I promise.

And 1 thing about this project is that you really can't mess up because you're drawing your own shapes number 1 and then number 2 if you do mess up you can always cover it back up with either the reflective mirror tape or paper or you can add extra boards.

you can see the 2 separate piles, the piles for

the shapes and the piles for the parallel pieces that I'm going to throw away.

So after I finished cutting up the shapes, I went ahead and started the second board.

the board that I'm going to put the shapes on.

A total of 12 foam boards and I'm taping them front and back.

Okay y'all, so out of this whole project this is the part that took the longest.

I should have labeled these as I was cutting them, but I was able to go back and look at the pictures and videos of the original sketch from earlier, so that helped out a lot.

It was basically like putting a puzzle together, but what I would recommend is labeling each piece and I did that after I put all the pieces where they needed to be.

And this is how the board looked once I got every piece into place.

Oh, and I did remove those foam board stickers.

So as you can see that says bottom right so when I get ready to put it back on the board I'll remember exactly where it is and the shape will be there to help me also.

And after I traced the second 1 I put number 2, bottom 2 I believe.

And what helped also is that I placed them on top of each other in separate piles.

So that's number 3 and then I'm going to continue to go around across the bottom of the board and then I'm going to work my way up the side.

And by the way, I know y'all have seen some extra hands and feet around this video.

They were confused as hell at first but they trusted the process

and they liked the ending result so that's all that matters.

Also make sure you're holding the shape as you're tracing it so it won't slide.

And since this is a corner piece, I'm going to put left bottom on it.

And that way I'll remember that this was on the left and on the bottom.

So I just worked my way around the board, tracing and also writing numbers.

By the way, I'm going to cash out the first person that can tell me how many extra bodies besides me were in the room.

The first person, not the second, not the third, but the first person.

I am going to move on to my mirror reflective paper and I'm going

I cut each strip like 2 inches wide and I just cut it as long as I could.

And I really do recommend this mirrored adhesive paper.

It was really long, I believe it was like 30 feet and it was good quality and I will be leaving the link

So I'll be going over each line with this mirror adhesive paper

and I'm just covering up everything, every line that

And this way, when I put the shapes back on, you will see the silver trim in between each shape.

with this project and she's on her phone.

And And This is how the board looks with all the mirror adhesive paper on it.

And now I'm going to start covering the shapes to put on top.

This is the fabric I'll be using to cover the shapes and I believe it's around 6 to 8 yards.

I believe I got 8 because I was scared that I was going to run out and I hate running out of material.

I got 8 yards and I'm going to be covering each shape with this fabric.

So I like to cut out the shape first to make it easier and then hot glue the fabric to the back of the foam board.

And this part is very easy, you just need to make sure you're being very neat when you're gluing it because you want everything to be flat and not sticking out.

So I'm just giving you guys just a couple of examples of how I did cover the shapes.

I'm not going to do all of them on camera because, I mean

you get the point, I showed you like 3 different shapes

And by the way, keep in mind as you're tracing and drawing your shapes, if you draw out or sketch out 30 shapes, you're gonna have to cut out 30 shapes, You're gonna have to trace 30 shapes and you're going to have to cover 30 shapes with fabric FYI

It wasn't long It didn't take long to do but I realized I cut

Oh by the way, shout out to Jonay Feng Shui.

She helped me cut the fabric so it did make it a lot quicker.

So if you have a little buddy to help you it will go by like nothing.

Next thing I'm going to do is put the shapes back on the board.

Next I'll be placing the shapes back on the board in the places that they need to be.

And labeling each board made it so much easier oh my gosh it took

so much less time to put them back on the board

Now I'll be going around with my hot glue gun and I'm going to

be attaching each piece to the board and after that we're pretty much done with the headboard.

And shout out to miss Jonee Feng Shui for helping me put this headboard on the wall and go subscribe to her YouTube channel.

So after I almost fell, I realized that I needed to take a break and I came back the next day.

I am taping 3 poster boards together and this will be the side panel of the bed where the lights will be.

So I'm taping these 3 foam boards together and I'll be adding these 2 body mirrors on top.

1 will go all the way to the top of it and 1 will go to the bottom.

I wanted the top to have a little bit more shape, so I'm gonna take my marker and trace out that piece.

After I'm done doing that, I'm gonna take my box cutter and cut it out.

Next, I'll be going over the sides with my mirror reflective paper and that is because board.

After that, I'll be taking up my mirror reflective paper and covering the bottom piece that was showing also.

Now I'll be attaching this board to the wall using my screws and I'm gonna put some screws in the bottom also.

I'm going to be attaching my mirrors 1 up and 1 down and I'll also be using screws to do that.

Now I'll be taking these pieces of wood that I cut at Home Depot and I'll be creating a frame of my chandelier.

I'll leave the links in the description box below.

There's 2 ways you can create this frame.

The way I'm doing it now, which is just putting screws in each corner, or you can use the L brackets and I also got the

L brackets from Home Depot and you can see that DIY in the Goddess DIY project that I did

and I'll leave that link in the description box below.

Next I'll be taking a strip of the mirror adhesive paper and I'll be covering the front and the sides of this frame.

And I did use my box cutter to go along the sides to get all the extra paper off.

Next I'll be adding this crystal garland that I got from Home Depot and as you saw in my other video.

And I'll be gluing them to the frame, the inside frame.

And this will be on the front side of the lamp, not the back side, but the front.

You can go in with the hot glue first and then you can go back over with either E6000 or your hot glue again.

After both sides were done, I got my screws and I screwed the lamp in on top of the mirror and I'm going to be doing the same thing for the second lamp.

Last but definitely not least I'll be using 4 of these lights that came from Walmart and they came with a remote and I'll be using those as my lights for my lamps and 1 thing I realized is that 1 1 remote can control all 4 so you don't necessarily need all 4 remotes.

After I did this side of the bed I completed the other side as well and this is how it turned out.

I did the gold the last time and this time I'm doing the silver And I'm very pleased with the outcome

by the way there's extra space on each side of the headboard and that's because she is thinking about getting a king and just in case she does it will fit in perfectly.

This is officially my favorite headboard so far.

This headboard was made for Nana so shout out to you and I hope you enjoy your room.

Please remember to like, comment, and subscribe and hit that notification bell.


Speaker 0: Welcome back to my channel Glitter Babes. I missed you all. My client today wanted a Paris themed room so I tried my best to stay within her design and I'm going

Speaker 1: to be creating a headboard today.

Speaker 0: If you watched my other DIY Goddess Headboard, this is a similar template of how I did that.

Speaker 1: I'm going to be taping these poster boards together and I believe I used a total of

Speaker 0: 12.

Speaker 1: I'm taping the poster boards together in rows of threes, and I'm going to make 4 rows of 3. And as you can

Speaker 2: see, I am taping the front and the back of each board, and I'm doing that to make the board more sturdy. So make sure that you are taping the front and back. Now that I have my 4 rows of 3 I will be taping all 4 rows together using my tape and I'm taping again front and the back of the board.

Speaker 0: And excuse the red board, they ran out of white for some reason and I had to do what I

Speaker 2: had to do. So that's the reason why there are 3 red foam boards.

Speaker 1: So the design of this headboard will be abstract so there's no right way to do this. All I'm doing is creating shapes, mostly triangular shapes,

Speaker 0: and I'm just going around the board drawing them out. But as you can see if I draw a line a certain way I make sure it's parallel to another line and that is because where those lines are the tape will be and This is actually really easy to do because I didn't have to think about the design. I just went with the flow. And I know I'm doing mine a specific way, but if it's easier for you to draw the whole triangle or the whole shape and then draw another line or the shape on top of it, if that's easier then you can do it

Speaker 2: that way. This is just the way that I did it. I connect each shape to each other.

Speaker 1: And this is how my sketch came out. It looks pretty good. Everything fit perfectly, so I have no complaints. And As you can see, I have the double lines, but if you

Speaker 2: do not care to have the silver in between each shape, you can just do 1 line and put everything back together without the silver in between.

Speaker 1: Next, I will be taking my box cutter and cutting out the shapes. I will only be using the actual shape and the extra pieces I will be throwing away. So this right here is an extra piece and I will be throwing that away. Because like I said earlier, that is where the silver will be showing through the silver adhesive tape. And it's not tape, it's silver adhesive reflective paper but

Speaker 0: the way I cut it

Speaker 1: you would think it's tape

Speaker 0: And don't be discouraged, this project is super easy, I promise. And 1 thing about this project is that you really can't mess up because you're drawing your own shapes number 1 and then number 2 if you do mess up you can always cover it back up with either the reflective mirror tape or paper or you can add extra boards. And as

Speaker 1: you can see the 2 separate piles, the piles for

Speaker 0: the shapes and the piles for the parallel pieces that I'm going to throw away.

Speaker 1: So after I finished cutting up the shapes, I went ahead and started the second board. And this is

Speaker 0: the board that I'm going to put the shapes on. And I'm making this board exactly how

Speaker 1: I made the first 1 earlier.

Speaker 0: A total of 12 foam boards and I'm taping them front and back. Okay y'all, so out of this whole project this is the part that took the longest. I should have labeled these as I was cutting them, but I was able to go back and look at the pictures and videos of the original sketch from earlier, so that helped out a lot. It was basically like putting a puzzle together, but what I would recommend is labeling each piece and I did that after I put all the pieces where they needed to be.

Speaker 1: And this is how the board looked once I got every piece into place. Oh, and I did remove those foam board stickers.

Speaker 0: Next I took my marker and I

Speaker 1: traced each piece and before I put it

Speaker 0: to the side I labeled everything. So as you can see that says bottom right so when I get ready to put it back on the board I'll remember exactly where it is and the shape will be there to help me also. And after I traced the second 1 I put number 2, bottom 2 I believe. And what helped also is that I placed them on top of each other in separate piles. So that's number 3 and then I'm going to continue to go around across the bottom of the board and then I'm going to work my way up the side.

And by the way, I know y'all have seen some extra hands and feet around this video. I had a whole audience

Speaker 2: the whole time. They were watching my every move.

Speaker 1: They were confused as hell at first but they trusted the process

Speaker 0: and they liked the ending result so that's all that matters.

Speaker 1: Also make sure you're holding the shape as you're tracing it so it won't slide.

Speaker 0: So it won't slide. And since this is a corner piece, I'm going to put left bottom on it. And that way I'll remember that this was on the left and on the bottom. So I just worked my way around the board, tracing and also writing numbers. By the way, I'm going to cash out the first person that can tell me how many extra bodies besides me were in the room.

I'm gonna cash up you $20. The first person, not the second, not the third, but the first person. Let me know in the comments.

Speaker 1: After I'm done with my shapes

Speaker 0: I am going to move on to my mirror reflective paper and I'm going

Speaker 1: to be cutting this into strips.

Speaker 0: I cut each strip like 2 inches wide and I just cut it as long as I could.

Speaker 1: And I really do recommend this mirrored adhesive paper. It was really long, I believe it was like 30 feet and it was good quality and I will be leaving the link

Speaker 0: in the description box below.

Speaker 1: So I'll be going over each line with this mirror adhesive paper

Speaker 0: and I'm just covering up everything, every line that

Speaker 1: I see. And this way, when I put the shapes back on, you will see the silver trim in between each shape. And check out this girl over here.

Speaker 0: I brought her here to help me

Speaker 1: with this project and she's on her phone. She ain't right. She ain't right. And And This is how the board looks with all the mirror adhesive paper on it.

Speaker 0: And now I'm going to start covering the shapes to put on top.

Speaker 1: This is the fabric I'll be using to cover the shapes and I believe it's around 6 to 8 yards.

Speaker 0: I believe I got 8 because I was scared that I was going to run out and I hate running out of material. So I'm going to go with 8. I got 8 yards and I'm going to be covering each shape with this fabric. So I like to cut out the shape first to make it easier and then hot glue the fabric to the back of the foam board.

Speaker 1: And this part is very easy, you just need to make sure you're being very neat when you're gluing it because you want everything to be flat and not sticking out.

Speaker 0: So I'm just giving you guys just a couple of examples of how I did cover the shapes. I'm not going to do all of them on camera because, I mean

Speaker 1: you get the point, I showed you like 3 different shapes

Speaker 0: and how I did glue the fabric on them. And by the way, keep in mind as you're tracing and drawing your shapes, if you draw out or sketch out 30 shapes, you're gonna have to cut out 30 shapes, You're gonna have to trace 30 shapes and you're going to have to cover 30 shapes with fabric FYI

Speaker 2: This is a long ass project.

Speaker 0: It wasn't long. Don't get me wrong. It wasn't long It didn't take long to do but I realized I cut

Speaker 2: out a bunch of shapes.

Speaker 0: Oh by the way, shout out to Jonay Feng Shui. She helped me cut the fabric so it did make it a lot quicker.

Speaker 2: So if you have a little buddy to help you it will go by like nothing.

Speaker 1: Next thing I'm going to do is put the shapes back on the board. Next I'll be placing the shapes back on the board in the places that they need to be. And labeling each board made it so much easier oh my gosh it took

Speaker 0: so much less time to put them back on the board

Speaker 2: so so remember to label your pieces.

Speaker 0: Now I'll be going around with my hot glue gun and I'm going to

Speaker 1: be attaching each piece to the board and after that we're pretty much done with the headboard. And shout out to miss Jonee Feng Shui for helping me put this headboard on the wall and go subscribe to her YouTube channel. Y'all check this out. Y'all I almost lost my life. It flies right before my eyes.

So after I almost fell, I realized that I needed to take a break and I came back the next day. I am taping 3 poster boards together and this will be the side panel of the bed where the lights will be. So I'm taping these 3 foam boards together and I'll be adding these 2 body mirrors on top. 1 will go all the way to the top of it and 1 will go to the bottom. I wanted the top to have a little bit more shape, so I'm gonna take my marker and trace out that piece.

Speaker 0: After I'm done doing that, I'm gonna take my box cutter and cut it out.

Speaker 3: Next, I'll be going over the sides with my mirror reflective paper and that is because board.

Speaker 0: After that, I'll be taking up my mirror reflective paper and covering the bottom piece that was showing also.

Speaker 1: Now I'll be attaching this board to the wall using my screws and I'm gonna put some screws in the bottom also.

Speaker 0: And now I'm gonna

Speaker 3: be attaching my and now

Speaker 1: I'm going to be attaching my mirrors 1 up and 1 down and I'll also be using screws to do that. Now I'll be taking these pieces of wood that I cut at Home Depot and I'll be creating a frame of my chandelier. I'll leave the links in the description box below. There's 2 ways you can create this frame. The way I'm doing it now, which is just putting screws in each corner, or you can use the L brackets and I also got the

Speaker 0: L brackets from Home Depot and you can see that DIY in the Goddess DIY project that I did

Speaker 1: and I'll leave that link in the description box below. Next I'll be taking a strip of the mirror adhesive paper and I'll be covering the front and the sides of this frame. And I did use my box cutter to go along the sides to get all the extra paper off. Next I'll be adding this crystal garland that I got from Home Depot and as you saw in my other video. And I'll be gluing them to the frame, the inside frame.

And this will be on the front side of the lamp, not the back side, but the front. You can go in with the hot glue first and then you can go back over with either E6000 or your hot glue again. And I'm putting 3 garlands on each side

Speaker 4: of the lamp also.

Speaker 1: After both sides were done, I got my screws and I screwed the lamp in on top of the mirror and I'm going to be doing the same thing for the second lamp.

Speaker 0: Last but definitely not least I'll be using 4 of these lights that came from Walmart and they came with a remote and I'll be using those as my lights for my lamps and 1 thing I realized is that 1 1 remote can control all 4 so you don't necessarily need all 4 remotes. After I did this side of the bed I completed the other side as well and this is how it turned out. This project turned out so beautiful. I am just in love with this headboard. I did the gold the last time and this time I'm doing the silver And I'm very pleased with the outcome

Speaker 1: by the way there's extra space on each side of the headboard and that's because she is thinking about getting a king and just in case she does it will fit in perfectly. This is officially my favorite headboard so far.

Speaker 0: This headboard was made for Nana so shout out to you and I hope you enjoy your room. Thank you all for watching this video. Please remember to like, comment, and subscribe and hit that notification bell. I love you all so much and see you

Speaker 2: on the next DIY. ♪ Beat

Speaker 3: Music

Speaker 0: ♪

See all Lots of glitter And shiii transcripts on Youtube

DIY “A NIGHT IN PARIS” HEADBOARD AND WALL SCONCES - INEXPENSIVE HEADBOARD ~ HEADBOARD IDEAS